HMI
Setting Multiple Controllers on an HMI
Some applications may require multiple protocols to be setup on one HMI. This is possible as long as there are available ports. This is explained in further detail below. The same port cannot be used for multiple controllers/protocols. XP Builder ...
HMI to PLC Pass Through Connection
Pass-through function is a ability to modify, monitor, upload, and download PLC programs by connecting an HMI and PC with Ethernet or USB loader cable while the HMI and PLC are connected via RS232C communication. By using the pass-through function, ...
Sending Logging Files Automatically over e-mail
Logging files can be sent automatically via e-mail with the below settings. In the project properties, Auxiliary Settings, select "Use e-mail Function". Be sure to see our other article on e-mail server setup In the Logging settings, under the ...
Operation Logging
You can use the Operation Log function to record the operations on the XGT panel. This function enables you to check which operation was performed, and when or where it was performed. With this function, you can analyze the causes of errors or other ...