The below steps show setup and operation of an H100 utilizing the BACnet/IP card. The setup utilizes standard Ethernet/IP with a Productivity 1000 PLC. At the bottom of this article is attachment for user manual and guide.   Also stating that user should perform drive parameter save function, which have shortcut at the end of this document.  

This guide is not meant to assist with BACnet/IP setup. 

Pinging the PLC and VFD.

Input Setup

Output Setup

Config Data

Successful Connection

WebPage

The BACnet/IP card features a built-in webpage. 

Type in the password from COM-86. ‘0’ is default.

User should also perform a drive parameter save function, when completed with the IP and instance settings (see below shortcut):