LS Electric America | HMI | Knowledge Base

HMI
eXP2 PLC Timeout
If you are working with an eXP2 HMI and have a "PLC Timeout" error displayed, this indicates that the HMI cannot connect to the host controller. First, check the below. Verify correct communication settings (protocol, baud rate, addresses, parity, ...
"Language font for e-mail not set" error
When setting up the e-mail server settings on an eXP or iXP2 HMI you may get an error like below. See the below steps to clear it. Go to the Project Properties. Select "Language". Here you must select a font for the "Default runtime language". See ...

HMI