Programming
H100+ Quick Manual
With the release of the H100+ we have released a quick manual to help our users navigate the drive.
G100 Table of Functions
Below is a table of functions for the G100. This guide will help you navigate through the parameter list of the drive.
Devicenet EDS files for iS7
See attached files for the iS7 VFD with a Devicenet card installed. Note that file changes based on VFD capacity. 1) iS7 S/W Version 1.02 (below 75kW) : Lsis_iS7_AcDrive_v102a.EDS 2) iS7 S/W Version 1.02 (90kW~160kW) : Lsis_iS7_AcDrive_v102b.EDS 3) ...
VFD UL Certifications
Attached is the latest UL Certificates on Compliance for all current LS VFDs sold in the US.
S100 Profinet Setup
For assistance/guidance on setting up an S100 for Profinet communication please refer the the attached GSDML file and User Manual.
S100 EtherCAT Setup
For assistance/guidance on setting up an S100 for Ether CAT communication please refer the attached EDS/ESI files and User Manual. NOTE:
S100 Safety Certificate
The S100 VFD has been tested in accordance with EN 61800-5-2:2007, EN 61508-1:2010, and EN 61508-2:2010. See attached certificate.
S100 PM Control Specification
The S100 has the ability to control IPM and SPM motors. see below specs for this control method. Sensorless for PM motor Starting Torque : 100% @ 3Hz Speed Accuracy: 1% Speed Control Range: 20:1
S100 and G100 Specification Comparison
Firmware Flash Procedures
Use the attached firmware flash procedures for assistance on update VFD firmware.
iS7 ProfiBus GSD File
Refer to below attachment.
Multi-Step Frequency Setup for the M100
This document is meant to assist setting up the M100 for applications which need to switch between Multi-Step (preset) speeds via the drives multi-function inputs. Setup and operation can sometimes lead to confusion since the preset speeds are named ...
Marine Certification for the H100 VFD
The LS Electric H100 VFD has numerous Marine Certifications. See attached certificates.
Multi-Step Frequency Setup for the C100
This document is meant to assist setting up the C100 for applications which need to switch between Multi-Step (preset) speeds via the drives multi-function inputs. Setup and operation can sometimes lead to confusion since the preset speeds are named ...
Multi-Step Frequency Setup for the G100 and S100
This document is meant to assist setting up the G100 or S100 for applications which need to switch between Multi-Step (preset) speeds via the drives multi-function inputs. Setup and operation can sometimes lead to confusion since the preset speeds ...
Multi-Step Frequency Setup for the H100
This document is meant to assist setting up the H100 for applications which need to switch between Multi-Step (preset) speeds via the drives multi-function inputs. Setup and operation can sometimes lead to confusion since the preset speeds are named ...
iS7 Tag List for Ethernet IP
The attached file can be imported into software such as RS Logix.
S100 Tag List for Ethernet IP
The attached file can be imported into software such as RS Logix.
VFD Quick Start Guides
Utilize the attached quick start references for basic startup and programming for LS VFDs. These provide a basic step by step guide for wiring, keypad navigation, and programming.
Slip Compensation Control Mode
Slip Compensation is a VFD control mode that controls the motor speed by estimating the motor slip according to the applied load. The output frequency is automatically corrected to compensate for the estimated slip. The slip frequency is calculated ...
Smart Copier Manuals
The Smart Copier is a versatile tool which can be used for updating VFD firmware and transferring parameters without the need for power. There are two manuals for the Smart Copier. One shows how to download firmware into an LS VFD. The other shows ...