Operation Logging

Operation Logging

You can use the Operation Log function to record the operations on the XGT panel. This function enables you to check which operation was performed, and when or where it was performed. With this function, you can analyze the causes of errors or other problems from the recorded log.


See attached operation log sample file. Below is a description of how it works.

 1.      Operation Logging Example

             a.     Screenshot of program.

 

b.     Load in the project file and try the below.

             - Switching from menu screen to main monitoring screen (Start the program).

            - Push the Trigger Operation Log button.

            - Push the Bit Switch button.

            - Change the value in the numeric input object

            - Push the backup button

        c.     After performing the above, click “communication -> Receive” at XP-Builder’s main menu, upload the backup file (in .csv format) and confirm the content in .csv file matches the actions performed. (See attached .csv file example).