Connecting LS Electric Drives to DriveView 9 Software

Connecting LS Electric Drives to DriveView 9 Software

DriveView 9 is a PC-based software tool used for remote monitoring, programming, and troubleshooting LS Electric America's drives. There are various connection methods and cables for a direct connection which are dependent on the drive model being used. 



Refer to the table below for the connections available depending on the drive:

Connection Type

H100

iS7

S100

G100

M100

USB Mini Cable
(Part # 46310162)

Yes

-

-

-

-

RJ-45 to Serial Cable <1>
(Part # 76676236322)

Yes

Yes

Yes

-

-

USB to RS232 Cable <2> 
(Part # 64090353)

Yes

Yes

Yes

-

-

USB to RS485 Cable <3>
(Part # 64090354)

-

-

-

Yes

Yes

Modbus RTU <4>

 

Yes

Yes

Yes

Yes

Yes

Modbus TCP/IP
(Option Card)

 

Yes

Yes

Yes

Yes

-

<1> A USB-to-serial adapter is also required for most PCs. LS Electric America does NOT offer this adapter.
<2> This cable requires a 19200bps baud rate. Set the baud rate to match in both the drive and in DriveView 9.
<3> This cable requires a 9600bps baud rate. Set the baud rate to match in both the drive and in DriveView 9.
<4> LS Electric America does NOT offer a USB-to-RS234/485 adapter.